Release
 
Part 12 - Installing Courier-imap/imaps with Courierpassd
(Redhat)

Now that you have qmail up and running, we're going to add a few extras onto it. For starters, we're going to install Courier-imap/imaps along with Courierpassd. We will also be installed the Courier-authlib package to enable proper authentication through courier-imap. Installing IMAP will, obviously, enable IMAP connections to the mail server and it is a necessary ingredient for most popular web based mail clients such as Horde, SQwebmail and Squirrelmail. Courier-imap is the preferred IMAP server to install because it has built in support the vchkpw mail user setup that Vpopmail utilizes. In short, Courier IMAP works with Vpopmail and virtual domains. In addition to installing Courier-imap, we're going to install Courierpassd. Courierpassd is a utility that allows users to change their mailbox passwords remotely. This will come in handy when we install Squirrelmail in the next step of the installation. Courierpassd will allow your mail users to change their passwords using the Squirrelmail interface. This will give your users more power over their account settings and, more importantly, keep them from pestering you whenever they want to change their passwords. Keep in mind that when we get to compiling courier-imap, it will have to be compiled by a NON-ROOT USER.

So let's start by installing courier-authlib...

cd /downloads/qmailrocks/

tar jxvf courier-authlib-0.55.tar.bz2

cd courier-authlib-0.55

./configure --prefix=/usr/local --exec-prefix=/usr/local --with-authvchkpw --without-authldap --without-authmysql --disable-root-check --with-ssl --with-authchangepwdir=/usr/local/libexec/authlib --with-redhat

make && make check

make install-strip && make install-configure

Now we will add a startup command for authedaemond to the /etc/rc.local file to ensure startup on boot...

vi /etc/rc.local

Add the following line:

/usr/local/sbin/authdaemond start

Now let's install courier-imap/imaps...

Remember, courier imap needs to be compiled by a NON-ROOT USER. For the purposes of this guide, I am going to use a NON ROOT user called bsmith. Anyone who doesn't read this and asks me who "bsmith" is will be smacked across the head.

cd /downloads/qmailrocks/

tar jxvf courier-imap-4.0.2.tar.bz2

chown -R bsmith:wheel courier-imap-4.0.2

cd /downloads/qmailrocks/courier-imap-4.0.2

su bsmith

./configure --prefix=/usr/local --exec-prefix=/usr/local --with-authvchkpw --without-authldap --without-authmysql --disable-root-check --with-ssl --with-authchangepwdir=/usr/local/libexec/authlib --with-redhat

Note: the configure process will take a few minutes. Go grab a snack...

make && make check

Now we will exit out of our NON-ROOT USER and go back to being root...

exit

make install-strip && make install-configure

Now let's create an SSL certificate for the IMAP-SSL server...

/usr/local/sbin/mkimapdcert

This will start and automated process that creates a self-signed imap-ssl X.509 certificate called imapd.pem. It should create this new certificate at /usr/local/share/imapd.pem. If the certificate already exists, the "mkimapdcert" tool will not let you overwrite it.

A Note on IMAP-SSL certificates: Keep in mind that since this SSL certificate is self-signed and is not from a "trusted" authority such as Verisign or Thawte, mail clients such as Outlook will give a warning when they attempt to connect to your IMAP-SSL server on port 993. The warning will state that the certificate is not from a "trusted" authority. While the warning is a bit ugly, it does NOT mean your IMAP-SSL connection is any less secure than it would be with a real certificate from Verisign or Thawte. All it means is that the SSL certificate was not generated by a company which Microsoft recognizes as a "trusted" authority. From a security standpoint, however, your IMAP-SSL server is every bit as secure as it would be if you bought the certificate from Verisign or Thawte. If the warning is too inconvenient for your purposes, you will need to purchase a "real" certificate from a "trusted" authority such as Verisign or Thawte. Be prepared to shell out a good chunk of change if you do so.

vi /usr/local/etc/imapd.cnf

change postmaser@example.com an administrative email address

Save and exit

vi /usr/local/etc/imapd

Make sure that the following configuration exists: IMAPDSTART=YES

vi /usr/local/etc/imapd-ssl

Make sure that the following configuration exists: IMAPDSSLSTART=YES

Make sure that the following configuration exists: TLS_CERTFILE=/usr/local/share/imapd.pem

Save and exit the file.

Special note for people running a small home or office network:

If you are planning on having multiple users connect to your IMAP server from a single IP address, such as in a small home or office network, you may want to increase the "MAXPERIP" setting with the /usr/local/etc/imapd config file. This setting establishes the maximum number of IMAP connections that can be made from a single IP address. An example of this might be if you have a small office network runing on a single DSL or Cable IP address and your mail server is outside of that network. While each computer in your internal network may have it's own private IP address, to the outside world anyone coming from your network has the single routeable IP address assigned to your DSL or Cable connection. The default setting for "MAXPERIP" is 4 so f you have a similar network setup and more than 4 people trying to access your IMAP server, you may want to increase this setting accordingly to avoid connection errors. Within the /usr/local/etc/imapd file, the line you are looking for looks like this:

MAXPERIP=4

vi /usr/local/etc/authlib/authdaemonrc

Around like 27, you should see the "authmodulelist" setting. Make sure that "authvchkpw" is the only module listed. Like so:

authmodulelist="authvchkpw"

Save and exit the file.

Now we create the startup scripts...

cp /usr/local/libexec/imapd.rc /etc/rc.d/init.d/imap

cp /usr/local/libexec/imapd-ssl.rc /etc/rc.d/init.d/imaps

Now let's start up Authdaemond, IMAP and IMAPS. To be safe we'll stop each service before starting it...

/usr/local/sbin/authdaemond stop

/usr/local/sbin/authdaemond start

/etc/rc.d/init.d/imap stop

/etc/rc.d/init.d/imaps stop

/etc/rc.d/init.d/imap start

/etc/rc.d/init.d/imaps start

If you run "nmap localhost", you should see both 143 and 993 now open and listening.

Now let's test it...

telnet localhost 143

Trying 192.168.1.10...
Connected to 192.168.1.10.
Escape character is '^]'.
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE STARTTLS] Courier-IMAP ready. Copyright 1998-2003 Double Precision, Inc. See COPYING for distribution information.
a login postmaster@mydomain.com my_password
a OK LOGIN Ok. (successful login!)
a logout (logs you out)
* BYE Courier-IMAP server shutting down
a OK LOGOUT completed
Connection closed by foreign host.

Hint: The "a" that you see before my login commands is required.

If you were able to log in , as in the example above, you're all set. IMAP is installed! For further testing, you can configure a mail client such as Outlook to test both the IMAP and IMAP-SSL connetion to your server. IMAPS runs on port 993.

Now that Couroier-imap is installed, let's install Courierpassd. Remember, Courierpassd is going allow us to enable your mail users to change their own mail passwords via the Squirrelmail interface.

Note: Courierpassd will require that port 106 be open to at least local traffic (traffic from 127.0.0.1)

cd /downloads/qmailrocks

tar zxvf courierpassd-1.1.0-RC1.tar.gz

cd courierpassd-1.1.0-RC1

./configure

make && make install

OK. Courierpassd is installed now. Next, we are going to configure Xinetd/Inetd to run courierpassd. Most Redhat installations use Xinetd, but I've included Inetd directions just in case

If your server uses Xinetd, here's how you integrate Courierpassd into it:

cd /etc/xinetd.d

Here we create the xinetd script for courierpassd...

vi courierpassd

service courierpassd
{
port = 106
socket_type = stream
protocol = tcp
user = root
server = /usr/local/sbin/courierpassd
server_args = -s imap
wait = no
only_from = 127.0.0.1
instances = 4
disable = no
}

Note: You may want to add additional IP's to the "only_from" setting above, depending on your needs.

Save and exit.

 

If your server uses Inetd, here's how integrate Courierpassd into it:

vi /etc/inetd.conf

Add the following line:

courierpassd stream tcp nowait root /usr/local/sbin/courierpassd -s imap

Save and exit.

Now let's add the Courierpassd service to the system's services file:

vi /etc/services

Append to following line to the /etc/services file:

courierpassd 106/tcp #for /etc/xinetd.d/courierpassd

If your system uses Xinetd, them we now want to restart Xinetd:

/etc/rc.d/init.d/xinetd restart

If your system uses Inetd, then we now want to restart Inetd

/etc/rc.d/init.d/inetd restart

Now let's test Courierpassd by trying the reset the password for a mail account. Here's what a successfull test should look like:

root@redbox:/# telnet localhost 106
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
200 courierpassd v0.30 hello, who are you?
user postmaster@qmailrocks.org
200 Your password please.
pass my_password
(don't be a dumbass. Put your own password here)
200 Your new password please.
newpass my_new_password
(don't be a dumbass. Put your new password here)
200 Password changed, thank-you.
quit
200 Bye.
Connection closed by foreign host.
root@redbox:/#

If the above session is successful for you, Courierpassd is working correctly!

Now that we've got Courier-imap and Courierpassd installed, let's install the webmail client - Squirrelmail.

Proceed to Part 13


 

Color Coded Qmail Installation Key
 
Regular Black Text 
 Qmail installation notes and summaries by the author. Me talking.
 
Bold Black Text 
 Commands to be run by you, the installer.
 
Bold Maroon Text 
 Special notes for Redhat 9 users.
 
Bold Red Text 
 Vital and/or critical information.
 
Regular/Bold Purple text 
 Denotes helpful tips and hints or hyperlinks.
 
Regular Orange Text 
 Command line output.
Cp

Regular green text 

 Denotes the contents of a file or script.
home | about | the installation | utilities | faq | contact | journal | mailing list | list archive | forum | links | donatemerchandise
modified
This mirror last modified: Thursday, August 9th, 2012 15:58:37 CEST
 
The Rocks Project